The Rack Sentry® CONTOUR is changing the face of rack protection with its curved and slim contour shape. Featuring round edges and a slimmer profile, the CONTOUR increases the rack clearance available to forklift drivers navigating narrow aisles. The more clearance, the less chance of tagging the rack protector or upright.
Tapered arms on the CONTOUR reduce the rear face by more than 90 percent making it almost “invisible” to forklift drivers exiting the rack area. When protecting half-depth rack uprights, these hinged arms can be removed to maintain a strong, secure fit. In addition, the design has been improved to fit over beam connector hardware.
VELCRO® straps provide full coverage and 100 percent holding power. The Rack Sentry CONTOUR can be installed or removed in seconds; no tools necessary. The sculpted sides lend to the ease of installation and removal for proper rack inspection. All sizes now feature Sentry’s exclusive cut-out for horizontal on-beam installations; no cut-out sizes are needed.
Manufactured with a proprietary mix of flexible polymers, the Rack Sentry CONTOUR is currently available in sizes to fit 3”, 3-1/4”, 3-1/2”, 4” & 4.75″ rack upright.
Rack Sentry CONTOUR Sizes
All Rack Sentry® CONTOUR products are 18″ (457mm) tall. They are equipped with 2 VELCRO® straps that allow installation on any brand, shape, or style of rack upright with the correct width face.
RSC-75
All Rack Sentry® CONTOUR products are 18″ (457mm) tall. They are equipped with 2 VELCRO® straps that allow installation on any brand, shape, or style of rack upright with the correct width face.
RSC-75END
RS75END is a specially configured product that is designed to cover the front and the side of a rack upright. This gives it the ability to be mounted to the end of aisle where protection to both front and sides are vital. Ideally designed to cover a 75x75mm (3″x3″) rack, this can be mounted on other sizes if necessary.
RSC-80
Fits any brand rack with an upright face 80mm (3.25″) wide. RS80 is 457mm (18″) tall with an overall width of 129mm (5.06″). The opening is 80x75mm (3.25″x3″) but will fit any rack with the correct width face.
RSC-90
Fits any brand rack with an upright face 90mm (3.5″) wide. RS90 is 457mm (18″) tall with an overall width of 154mm (6.04″). The opening is 90x75mm (3.5″x3″) but will fit any rack with the correct width face.
RSC-100
Fits any brand rack with an upright face 100mm (4″) wide. RS100 is 457mm (18″) tall with an overall width of 154mm (6.04″). The opening is 100x75mm (4″x3″) but will fit any rack with the correct width face.
RSC-120
RSC-120 Fits any brand rack with an upright face 120mm (4.75″) wide. RS120 is 457mm (18″) tall with an overall width of 174mm (6.8″). The opening is (120x75mm) 4.75 x 3 but will fit any rack with the correct width face.